Foot Brake - Grizzly G0636X Owner's Manual

Foot Brake

The Model G0636X is equipped with a foot brake
(see Figure 37). Use the brake only in emergency
situations to stop power from going to the motor
and bring the blade to a halt.
The foot brake will not stop the bandsaw
wheels and blade instantly. DO NOT become
over confident and relax your safety aware-
ness because of the foot brake feature.
Figure 37. Foot brake location.
Model G0636X (Mfd. Since 09/18)
Table Tilt
Personal injury or death
can occur if the bandsaw
starts
adjustment. Disconnect
power from the bandsaw
before performing table
adjustments.
The bandsaw table will tilt 5˚ left and 45˚ right to
provide a wide range of cutting options.
To tilt table:
1. DISCONNECT MACHINE FROM POWER!
2. Loosen table tilt lock lever shown in Figure
38.
3. To tilt table to the right, turn table tilt handwheel
clockwise (see Figure 38).
Lock Lever
Table Tilt Handwheel
Figure 38. Table tilt controls.
4.
To tilt table to the left, turn table tilt handwheel
clockwise one turn, lower positive stop bolt,
then turn handwheel counterclockwise.
5.
Secure table tilt lock lever.
6. Follow "Positive Stop" instructions on Page
20 for resetting stop bolt and table for hori-
zontal (0º) operations.
during table
-33-