Installing Fence - Grizzly G0636X Owner's Manual

Installing Fence

The fence assembly mounts directly to the work
table. Ensure all fence and rail fasteners remain
tight for best performance.
To install fence:
1.
Install resaw fence lock handle, 8mm fender
washer, and moving plate onto standard
fence (see Figure 18), then slide resaw fence
over moving plate.
Resaw Fence
Resaw Lock
Handle
Figure 18. Example of attaching resaw fence to
standard fence.
-22-
2.
3.
4.
Assembly
Moving
Plate
Tighten resaw lock handle.
Pull fence handle up and place fence assem-
bly on rail, as shown in Figure 19.
Push fence handle down to lock fence assem-
bly in place (see Figure 19).
Fence
Fence
Handle
Figure 19. Fence installed on table.
Model G0636X (Mfd. Since 09/18)
Rail