Zenith ChillTap Residential Installation Instructions & User Manual page 7

A
Note: Ensure that A and B are positioned
at opposite ends of the cabinet.
Fig.4
Additional ventilation
The following instructions are critical if the vent kit, as supplied, cannot be fitted.
If the vent kit cannot be used, or for high use applications where the cupboard space temperature is 35°C
or higher, an optional Vent Tray Kit or Exhaust Fan kit may be fitted. Contact your local service centre
for more information.
• Vent tray part no. 93541NZ (optional accessory)
• Dual exhaust fan kit, part no. 93156NZ (optional accessory)
Vent tray
Installation instructions
C
B
285.00
A - KICKBOARD CUT-OUT
1.Drill 4 pilot holes Ø12 in corners
2.Finish cut-out using Jigsaw
and Keyhole or Wall Board saw
B - CABINET FLOOR
314.00
CUT-OUT
1.Drill two pilot holes Ø12
326.00
2.Finish cut-out using Jigsaw
C - CABINET FLOOR
CUT-OUT
1.Drill 4 pilot holes Ø12 in corners
2.Finish cut-out using Jigsaw
and Keyhole or Wall Board saw
Dual exhaust fan
806143NZ v1.06 07.19 CW ChillTap UCCT
07