Cisco 6800 Series Troubleshooting Manual page 10

Change the Debug Log Level
Step 17
Press Ctrl+C.
Step 18 Go to the text editor and click in the top of the file body.
Step 19
Press Ctrl+V.
Step 20 Save the file to a known location on your PC.
Name the file with the log type, date, and time. For example, siplog_20181212.txt.
Step 21 Use
Change the Debug Log Level
When you have problems with your system, detailed SIP logs and syslogs may help to identify the problem.
Use this procedure only when requested by your service provider. The amount of information gathered with
increased debug levels may degrade system performance.
Note
After you get the required logs, make sure you return the debug level to Normal Operation.
For more information about the fields, see
Before you begin
Connect to the base station web page as described in
Procedure
Step 1
Click Management.
Step 2 In the Syslog/SIP Log section, change the Upload of SIP Log to Enabled.
Step 3
In the Syslog/SIP Log section, change the Syslog Level to the required level.
Step 4 Click Save.
Step 5
After you capture logs, click Management.
Step 6 (Optional) In the Syslog/SIP Log section, change the Upload of SIP Log to Enabled.
Step 7 In the Syslog/SIP Log section, change the Syslog Level to Normal Operation.
Step 8 Click Save.
Turn on Multicell Debug Logs
In order to debug multicell problems, you need to turn multicell debugging. This causes the log files to contain
extra log messages about multicell.
Note After you get the required logs, make sure you return the debug level to Disabled.
Troubleshooting
10
Change the Debug Log Level, on page 10 to change the debug level to Normal Operation.
Management Settings Web Page
Sign into the Administration Web
Troubleshooting
Fields.
Page.