Table of Contents
Advertisement
Instruction Manual | Rexroth IndraDrive
5.2.5
X5, Motor Connection
Important Notes
WARNING
CAUTION
Notes on Installation
X5, Motor Connection HCS01.1E-W0003...W0013-x-02, -W0005-x-03, -W0008-x-03
View
Screw connection at connector
Connection cable
Stranded wire
Stripped length
Occurring current load and minimum required
connection cross section
Occurring voltage load
Lethal electric shock by live parts with more than 50 V!
Exclusively operate the device
●
with plugged on connectors (even if there haven't been any lines connec‐
ted to the connectors) and
●
with connected equipment grounding conductor!
Risk of damage to the device!
Provide strain relief for the terminal connectors of the device in the control cab‐
inet.
The equipment grounding conductor is connected directly to the device and not
via the connection point X5 (see description for connection of equipment
grounding conductor).
The indicated connection cross sections are the cross sections which can be
connected. Dimension the required cross section of the connection lines ac‐
cording to the occurring current load.
●
For optimum shield contact of the motor power cable, use the
supplied accessory HAS09.
●
For the connection between drive controller and motor, use
our ready-made motor power cables, where possible (see
documentation "Rexroth Connection Cables").
●
When using NFD03.1 mains filters, the maximum allowed con‐
ductor cross section is limited to 4 mm
Identifica‐
tion
A1
A2
A3
Unit
mm
2
AWG
mm
A
V
Electric Drives
| Bosch Rexroth AG
and Controls
2
.
Function
For power connection U1 at motor
For power connection V1 at motor
For power connection W1 at motor
Min.
0,25
24
8
See technical data of device used (I
See technical data of device used (U
23/65
Instructions for Use
Max.
2,5
12
)
out
)
out
Hide quick links:
Advertisement
Table of Contents
