Table of Contents
Advertisement
Instruction Manual | Rexroth IndraDrive
1
Important Notes
1.1
Safety Instructions
1.1.1
General Information
WARNING
●
Do not attempt to install and operate the components of the electric drive
and control system without first reading all documentation provided with
the product. Read and understand these safety instructions and all user
documentation prior to working with these components. If you do not have
the user documentation for the components, contact your responsible
Rexroth sales partner. Ask for these documents to be sent immediately to
the person or persons responsible for the safe operation of the compo‐
nents.
●
If the supplied documents contain some information you do not under‐
stand, it is absolutely necessary that you ask Rexroth for explanation
before you start working at or with the components.
●
If the component is resold, rented and/or passed on to others in any other
form, these safety instructions must be delivered with the component in
the official language of the user's country.
●
Only qualified persons may work with components of the electric drive and
control system or within its proximity.
In terms of this Instruction Manual, qualified persons are those persons
who are familiar with the installation, mounting, commissioning and oper‐
ation of the components of the electric drive and control system, as well
as with the hazards this implies, and who possess the qualifications their
work requires. To comply with these qualifications, it is necessary, among
other things,
–
to be trained, instructed or authorized to switch electric circuits and
components safely on and off, to ground them and to mark them,
–
to be trained or instructed to maintain and use adequate safety
equipment,
–
to attend a course of instruction in first aid.
●
The technical data, connection and installation conditions of the compo‐
nents are specified in the respective application documentations and must
be followed at all times.
●
If the components take the form of hardware, then they must remain in
their original state, in other words, no structural changes are permitted. It
is not permitted to decompile software components or alter source codes.
●
Do not mount damaged or faulty components or use them in operation.
●
Only use accessories and spare parts approved by Rexroth.
●
Follow the safety regulations and requirements of the country in which the
electric components of the electric drive and control system are operated.
●
Proper and correct transport, storage, mounting and installation, as well
as care in operation and maintenance, are prerequisites for optimal and
safe operation of the component.
Improper use of these components, failure to follow the safety instruc‐
tions in this document or tampering with the product, including disabling
of safety devices, could result in property damage, injury, electric shock
or even death.
Observe the safety instructions!
Electric Drives
| Bosch Rexroth AG
and Controls
5/65
Important Notes
Hide quick links:
Advertisement
Table of Contents
