Turn On Push To Talk; Set The Ring Volume For An Incoming Call - Cisco IP DECT 6800Series User Manual

Turn on Push To Talk

• Press More and select Delete to delete (unpair) the headset from the list. You need to confirm the deletion.
• Press More and select Info to view more information about the headset.
Turn on Push To Talk
You can use the handset as a two-way radio to talk with other active handsets in the system. You press a
specific button to start and end a conversation, so the feature is called Push to Talk.
Before you can use the feature, you need to enable it on your handset.
Procedure
Step 1 Press Menu
Step 2
Select Settings
Step 3 Highlight your choice.
• Off (default): You can't use Push to Talk.
• On: You can use Push to Talk.
Step 4 Press Select to save the setting.
Related Topics

Set the Ring Volume for an Incoming Call

Procedure
While the handset is ringing, press Volume
Related Topics
Cisco IP DECT 6800 Series User Guide
86
.
> Push to Talk.
Use Push to Talk, on page 45
Set the Ring Volume from the Settings
up or down.
Menu, on page 71
Settings