Delete A Speed-Dial Number - Cisco IP DECT 6800Series User Manual

Delete a Speed-Dial Number

• 0 to 9
• Pound (#)
• Asterisk (*)
• Comma (,)—This is the pause character, and gives a 2 second delay in the dialing. You can have several
The rules for dial strings are:
• Use the comma to separate the parts of the dial string.
• An authorization code must always precede a billing code in the speed-dial string.
• A single comma is required between the authorization code and the billing code in the string.
• A speed-dial label is required for speed dials with authorization codes and additional digits.
Before you configure the speed dial, try to dial the digits manually at least once to ensure that the digit sequence
is correct.
Your handset does not save the authorization code, billing code, or extra digits from the speed dial in the call
history. If you press Redial after you connect to a speed-dial destination, the handset prompts you to enter
any required authorization code, billing code, or additional digits manually.
Example
To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code
and billing code, consider the following requirements:
• You need to dial 9 for an outside line.
• You want to call 5556543.
• You need to input the authorization code 1234.
• You need to input the billing code 9876.
• You must wait for 4 seconds.
• After the call connects, you must dial the extension 56789#.
In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.
Delete a Speed-Dial Number
You can delete a speed-dial number assigned to entries 2 to 9. Entry 1 is used for your speed dial to voicemail.
Before you begin
You need at least one contact in your Speed Dial list.
Cisco IP DECT 6800 Series User Guide
36
commas in a row. For example, two commas (,,) represent a pause of 4 seconds.
Calls