Change The Lcd Screen Display Settings From A Web Browser; Battery Tips - NETGEAR Nighthawk 5G Mobile Hotspot Pro User Manual

4. Tap Settings.
The Settings page displays.
5. To change the screen brightness, select General and then use the slider to specify
the brightness.
6. To configure screen lock, select Screen Lock and then set Screen Lock to On or Off.
7. Set WiFi Info on Home to On or Off.
Change the LCD Screen Display Settings From a Web
Browser
To change the display screen settings:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://attwifimanager or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Advanced Settings > Device.
The Device page displays.
5. To change the screen brightness, select Screen Brightness and then use the slider
to specify the brightness.
6. To change the screen time-out, select Time-Out and then select the number of
minutes for the screen time-out.
7. Click the Apply button.
Your settings are saved.

Battery Tips

The following tips explain best practices for battery usage and care:
• Charge batteries in a room-temperature environment, which is generally between
68°F and 79° F (20°C and 26°C). Charging might be temporarily disabled if the
battery temperature exceeds 113°F (60°C). If the battery temperature is hot, but less
than 113°F (60°C), the battery charges, but at a slower rate than usual.
Manage Battery Usage and
Charging
Nighthawk 5G Mobile Hotspot Pro
27 User Manual