Cisco Ucs 64108 Fabric Interconnect - Cisco UCS 6400 Series Hardware Installation Manual

Product Overview
The Cisco UCS 6454 Fabric Interconnect chassis has two power supplies and four fans. Two of the fans
provide front to rear airflow.
Figure 2: Cisco UCS 6454 Fabric Interconnect Front View
1
3

Cisco UCS 64108 Fabric Interconnect

The Cisco UCS 64108 Fabric Interconnect (FI) is a 2-RU top-of-rack switch that mounts in a standard 19-inch
rack such as the Cisco R Series rack. This high-density FI is an ideal upgrade from the high-density Cisco
UCS 6296 Fabric Interconnect.
The high-density Cisco UCS 64108 Fabric Interconnect has 96 10/25 Gb SFP28 ports and 12 40/100 Gb
QSFP28 ports. Each 40/100 Gb port can break out into 4 x 10/25 Gb uplink ports. Sixteen ports (1-16) are
unified ports that support 10/25 GbE or 8/16/32G Fibre Channel speeds.The Cisco UCS 64108 Fabric
Interconnect supports:
• Maximum of 8 FCoE port channels
• Or 4 SAN Ports
• Or a maximum of 8 SAN port channels and FCoE port channels (4 each)
The Cisco UCS 64108 Fabric Interconnect also has one network management port, one RS-232 serial console
port for setting the initial configuration, and one USB port for saving or loading configurations. The FI also
includes L1/L2 ports for connecting two fabric interconnects in a high-availability configuration.
The Cisco UCS 64108 Fabric Interconnect also contains a CPU board that consists of:
• Intel Xeon Processor, 6 core
• 64 GB of RAM
• 8 MB of NVRAM (4 x NVRAM chips)
• 128 GB SSD (bootflash)
Power supply and power cord connector
L1 port, L2 port, RJ45, console, USB port,
and LEDs
Cisco UCS 6400 Series Fabric Interconnect Hardware Installation Guide
Cisco UCS 64108 Fabric Interconnect
Fans 1 through 4, numbered left to right, when
2
facing the front of the chassis
3