Cisco UCS 6400 Series Hardware Installation Manual page 8

Cisco UCS 6454 Fabric Interconnect
Note The Cisco UCS 6454 Fabric Interconnect supported 8 unified ports (ports 1 - 8) with Cisco UCS Manager
4.0(1) and 4.0(2), but with release 4.0(4) and later it supports 16 unified ports (ports 1 - 16).
The Cisco UCS 6454 Fabric Interconnect supports:
• maximum of 8 FCoE port channels
• or 4 SAN Ports
• or maximum of 8 SAN port channels and FCoE port channels (4 each)
The Cisco UCS 6454 Fabric Interconnect also has one network management port, one console port for setting
the initial configuration, and one USB port for saving or loading configurations. The FI also includes L1/L2
ports for connecting two fabric interconnects for high availability.
The Cisco UCS 6454 Fabric Interconnect also contains a CPU board that consists of:
• Intel Xeon D-1528 v4 Processor, 1.6 GHz
• 64 GB of RAM
• 8 MB of NVRAM (4 x NVRAM chips)
• 128 GB SSD (bootflash)
Figure 1: Cisco UCS 6454 Fabric Interconnect Rear View
1
3
For additional information about the port groups, see
Cisco UCS 6400 Series Fabric Interconnect Hardware Installation Guide
2
Ports 1-16 (Unified Ports 10/25 Gbps
Ethernet or FCoE or 8/16/32 Gbps Fibre
Channel)
Note When using Cisco UCS
Manager releases earlier than
4.0(4), only ports 1-8 are
Unified Ports.
Ports 45-48 (1/10/25 Gbps Ethernet or
FCoE)
2 Ports 17-44 (10/25 Gbps Ethernet or FCoE)
Note When using Cisco UCS Manager
releases earlier than 4.0(4), ports
9-44 are 10/25 Gbps Ethernet or
FCoE.
4 Uplink Ports 49-54 (40/100 Gbps Ethernet
or FCoE)
Each of these ports can be 4 x 10/25 Gbps
Ethernet or FCoE uplink ports when using
an appropriate breakout cable.
Port Speeds and Types, on page
Product Overview
6.