Installation Procedures; Installing Hkc-Wl50 (Outside Panel Assembly) To The Camera Body - Sony HKC-WL50 Installation Manual

1-3. Installation Procedures

1-3-1. Installing HKC-WL50 (Outside Panel Assembly) to the Camera Body

1. Push the two buttons and open the cover of HKC-WL50 (outside panel assembly).
HKC-WL50 (outside panel assembly)
2. Secure the wireless unit using the mounting holes shown in the figure.
Note
Use screws that meet the following conditions.
• Thread diameter: M2
• Depth of mounting hole: Max. 3 mm
Cover
Button
Mounting holes
Button
5