Sony HKC-WL50 Installation Manual page 22

4. Install the lock bracket as shown in the figure.
Note
When installing the lock bracket, pay attention to its orientation.
5. Secure the lock bracket with the supplied two screws.
Note
Pull the lock bracket in the direction of the arrow and tighten the screws.
M3 x 8
Lock bracket
M3 x 8
6. Remove the DC IN connector cap in the direction of the arrow and connect the cord of the HKC-WL50 (battery adaptor
assembly) to the DC IN connector.
DC IN connector
HKC-WL50
(cord of the battery adaptor assembly)
Lock bracket
Cap
20