Sony HKC-WL50 Installation Manual page 14

25. Pull out the harness (DC-OUT) from the main body.
Harness (DC-OUT) assembly
26. Remove the two screws, and then remove the DC OUT cover and the harness (DC-OUT) from the DC OUT holder.
DC-OUT holder
Harness (DC-OUT)
DC-OUT cover
PSW2 x 5
27. Attach the harness (DC-OUT-POWER) and the DC OUT cover to the DC OUT holder with two screws.
DC-OUT holder
Connector terminal (brown)
Harness (DC-OUT POWER)
Boss
DC-OUT cover
Hole
Boss
PSW2 x 5
Hole
Connector terminal (white)
Note
When attaching the DC OUT cover, align the two bosses with the two holes.
12