Entering Sensor Calibration Data - GE HygroPro User Manual

2.3.1 Setting Up the Pressure/Temperature Displays (cont.)

2.3.2 Entering Sensor Calibration Data

HygroPro User's Manual
To set the temperature display, enter
your password and use the arrow keys to
select Const Temperature. Press enter.
Use the same procedure to set the
temperature mode, and if Constant
Temperature is selected, to enter the
constant temperature value.
Enter your password and use the arrow
keys to scroll to Calibrate. Press enter.
Select Hygro Curve and press enter.
and press enter.
Select
Row1
Chapter 2: Operation
Page 31