Selecting Measurement Parameters - GE HygroPro User Manual

2.2.3 Selecting Measurement Parameters

To select the measurement parameters, complete the following steps:
Note:
As an example,
measurement parameter to be changed.
HygroPro User's Manual
To select the number of measurements to
be displayed on each screen, select
# of Views and press enter.
Use the up and down keys to select the
number of views desired and press
enter. Then, press enter again to return
to the previous menu.
Press escape to see the view setup. To
change a measurement parameter, use
the arrow keys to highlight the parameter
name and then press enter.
Use the up and down arrow keys to
select a measurement parameter and then
press enter twice.
has been selected as the
Dew Point
Chapter 2: Operation
Page 23