Temperature Control Options (One Thermostat) - Honeywell FocusPro 6000 Operating Manual

Operating Manual

Temperature control options (one thermostat)

Display shows temperature at
selected device
OUTDOOR
58
78
READ TEMP FROM...
THERMOSTAT
Press to choose temperature
measurement device
69-2054EFS—05
SET TO
78
THIS DEVICE
M28888
Both the thermostat and the remote control
have built-in temperature sensors. Press
a button to choose whether the system
responds to temperatures at the thermostat,
or at the location of the remote control.
If you use the remote control to measure
temperature, keep it in an upright position
in an area with good air circulation. Do not
place it near sources of heat or cold air. Keep
away from air ducts, direct sunlight, appli-
ances and electronic devices.
Note: This option will not appear if you have a
zone system (more than one thermostat). In zone
systems, temperature is always measured at the
thermostats.
6