Temperature "Hold - Honeywell FocusPro 6000 Operating Manual

Operating Manual
Temperature "hold" (programmable thermostats only)
1 Press to adjust temperature
OUTDOOR
58
72
2 Set temporary hold time
period OR press PERM. HOLD
HEAT
HOLD UNTIL
DONE
10:15
CANCEL
PERM. HOLD
69-2054EFS—05
SET TO
78
M28890
AM
M28891
Press or to adjust the temperature.
s t
Temporary hold:
Press to set the "Hold Until" time.
or
s t
When the timer expires (or when you press
CANCEL), the temperature will revert to the
setting you've programmed at the thermo-
stat.
Permanent hold:
Press PERM. HOLD to maintain the new tem-
perature permanently. The temperature will
remain as you set it until you press CANCEL to
revert to the setting you've programmed at
the thermostat.
Note: If you have a zone system (more than one
thermostat), Hold will only apply to the zone
displayed at the bottom of the screen. Scroll to
another zone to change the temperature in that
zone (see page 7).
8