System Settings - Honeywell FocusPro 6000 Operating Manual

System settings

Press to select
HEAT COOL
8:03
Press and hold either to select AUTO CHANGEOVER
AUTO
HEAT COOL
8:03
Note: The Auto Changeover option
is available only if programmed by
the system installer.
Note: Emergency Heat can only be
set at the thermostat.
OFF
AM
M28886
OFF
AM
M28887
Press a SYSTEM button to select:
• Heat: Thermostat controls only the heating
system.
• Cool: Thermostat controls only the cooling
system.
• Off: Heating and cooling systems are off.
Press and hold HEAT or COOL for 3 seconds
to select Auto Changeover (thermostat
automatically selects heating or cooling
depending on the indoor temperature).
In Auto Changeover mode, you can press
HEAT or COOL to display or adjust the settings
for each system.
To exit Auto Changeover mode, press and
hold HEAT or COOL for 3 seconds.
5
Wireless Remote Control
69-2054EFS—05