GE AV-300i User Manual page 100

· Input & ref = low lim
· Output = 0
· Output = low lim
· Output & ref = 0
· Output & ref = low lim
· Input = upp lim
· Input & ref = upp
· Freeze input
On the output it is possible to monitor the output and command state.
The Block inputs are:
The outputs:
Description:
SPEED CONFIG Moto pot
SPEED CONFIG SAVE PARAMETERS
Ch.1
100
GEH-6641E
it sets on the input and on the reference the speed lower limit
it sets at zero the output state
it sets on the output the speed lower limit
it sets at zero the output and reference state
it sets on the output and on the reference the speed lower limit
it sets on the input the speed upper limit
it sets on the input and on the reference the speed upper limit
it freezes the input reference independently of the following variations
· Motopot up src
· Motopot down src
· Motopot invers src
· Motopot preset src
· Motopot cmd mon
· Motopot output mon
Moto pot src
Mpot up src
Mpot down src
Mpot invers src
Mpot preset src
Moto pot cfg
Mpot lower lim
Mpot upper lim
Mpot acc dlt spd
Mpot acc dlt tim
Mpot dec dlt spd
Mpot dec dlt tim
Mpot init cfg
Mpot preset cfg
Moto pot mon
Mpot cmd mon
Mpot output mon
—————— Function Description ——————