Rice Cooking Using The Timer - Hitachi RZ-W3000YH Operating Instruction And Cook Book

Rice Cooking using the Timer

●
The timer can be set to "Timer 1" or "Timer 2". Upon factory shipment, "Timer 1" is set to "6:00" and "Timer 2" is set to "18:00".
●
The timer time is the time when the cooking will finish.
●
If the set time is near the current time, cooking will begin right away. (Timer lamp does not light up.)
1
2
Ex: Setting "Timer 1" to "7:30"
Check the current time and adjust if incorrect.
1
Press
●The flashing display will change each time the
button is pressed.
Flashes
2
Press
●The flashing display will change each time the
button is pressed.
When cooking a small amount of rice
●
22
*The display is an example for when "Texture
to make "Rice" to flash.
to make the desired cooking program flash.
To cook 0.5-2 cups
Press
(Set the timer to finish cooking
when you want to eat)
4
ATTENTION
●
Do not use the timer for "Mix".
(The quality of the added ingredients could
3
decline or they could sink into the rice.)
●
As a guideline, the timer is set within 12
hours.
5
" is selected for "White".
P.14
Flashes
Flashes
Flashes
●
The current time is displayed when
"Mix", "Porridge" is selected.
●
The selected cooking
method is remembered
when cooking starts for
white rice. However,
"Rapid", "Mix" and "Porridge"
will not be remembered;
instead, the "Texture" or
"Eco" used last time will be
restored.
●
"1-2 Person" cooking
prevents the rice from being
mushy or burnt and cooks
the rice to nice and soft
texture.
●
Once selected, "1-2 person"
cooking program will be
remembered.
Pressing again will cancel
the program.