Rice Cooking Using The Timer (Set The Timer To Finish Cooking When You Want To Eat) - Hitachi RZ-WS2YH Operating Instructions & Cook Book

Rice Cooking using the Timer
(Set the timer to finish cooking when you want to eat)
1
Ex: When setting the timer to finish cooking
rice at "7:30" on the "Normal" course
1
Press
the current time.
●
Adjust the current time if incorrect.
P.7
2
Press
timer time.
●
The Cook lamp flashes.
●
When timer cooking using "Porridge",
set by replacing step
"Timing with 'Porridge'" procedure on
the right.
3
Press
the timer time to "7:30".
●
The time changes each time the button
is pressed.
changes in increments of 1 hour and
changes in increments of 10 minute.
Continue pressing to speed up the
incremental change.
4
Press
when the buzzer sounds.
●
The Cook lamp is turned off and the
Timer lamp is lit.
The melody sounds and cooking ends.
The rice cooker automatically
switches to Warm.
●The Cook lamp is turned off and Warm is lit.
16
Use only for "Porridge".
The time and values in the figures are examples.
to display
to display the
with the
and to set
The timer is set
4 2
Flashes
●
As the timer time, the previous
time used is displayed. (The
time is set to 6:00 upon factory
shipment.)
Cooking
completion time
Turns Lights
up
off
This shows the time
when cooking will
be completed.
3
Timing with 'Porridge'
1
Press
to light up "Porridge".
Lights
up
Press
●
How to select the menu
P.14 and 15
To check the current time during
cooking or when the timer is set
The current time is displayed for 3
seconds when the "Hour" or "Min" Time
Setting button is pressed, and then the
clock returns to the original display.
Hot warning display
●If you remove the rice container from
the heat source when the temperature
of the heat source is high, the Cook
lamp and Hour/Min display flashes to
indicate Hot Warning.
●Even if the power is turned off with the
Off/On button, the hot warning display
does not disappear while the temperature
is high. The display turns off automatically
when the temperature drops.
P.6