Rice Cooking Using The Timer - Hitachi RZWS4YH Operating Instructions Manual

Table of Contents

Advertisement

Rice Cooking using the Timer

(Set the timer to finish cooking when you want to eat)
●The timer time is the time when
the cooking will finish.
●If the set time is close to the current
time, cooking will begin right away.
(Timer lamp does not light up.)
1
Press
the current time.
●Adjust the current time if incorrect.
P.7
2
Press
desired menu.
3
Press
timer time.
●The Cook lamp flashes.
4
Press
the timer time to "7:30".
5
Press
The timer is set when the buzzer sounds.
●The Cook lamp is turned off and the
Timer lamp is lit.
The melody sounds and cooking ends.
The rice cooker automatically
switches to Warm.
●The Cook lamp is turned off and the Warm
lamp is lit.
18
1
to display
to select the
to display the
and
to set
.
2
The time and values in the figures are examples.
Flashes
As the timer time, the previous
time used is displayed. (The
time is set to 6:00 upon factory
shipment.)
Example: When setting the timer
to finish cooking rice at "7:30"
Cooking
completion time
Turns off
Lights up
This shows the time
when cooking will
be completed.
5
3
ATTENTION
●Do not use the timer for "Mix".
(The quality of the added ingredients
could decline or they could sink into
the rice.)
●As a guideline, the timer is set
within 12 hours.
●Timed cooking can be used with
"Normal," "Porridge," "ECO,"
"2 Cups," and "1 Cup."
Pressing
will allow you to make selections in
the order shown.
●The time changes each time
the button is pressed.
changes in increments of 1 hour and
changes in increments of 10 minute.
Continue pressing to speed up the
incremental change.
To check the current time during
cooking or when the timer is set
The current time is displayed for 3
seconds when the "Hour" or "Mi n " Ti m e
Setti n g button is pressed, and then the
clock returns to the origi n al display.
Hot warning display
●If you remove the rice container from the heat
source when the temperature of the heat
source is high, the Cook lamp and Hour/Min
display flashes to indicate Hot Warning.
●Even if the power is turned off, the hot
warning display does not disappear while
the temperature is high. The display turns
off automatically when the temperature
drops.
4
P.6

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Rz-ws4y

Table of Contents