Honda Civic Hybrid Manual page 62

07/08/22 17:21:59 32SND620_062
After confirming that the belt is
6.
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child restraint system will not
be secure.
To remove slack, it may help to
put weight on the child restraint
system, or push on the back of the
restraint system while pulling up
on the belt.
TAB
Secure the belt in the slit by
7.
pushing up the tab. Make sure the
belt is not twisted and it is
positioned properly in the slit.
Installing a Child Restraint System
Push and pull the child restraint
8.
system forward and from side-to-
side to verify that it is secure
enough to stay upright during
normal driving manoeuvres. If the
child restraint system is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
To deactivate the lockable retractor
and remove a child restraint system,
unlatch the buckle, unroute the seat
belt, and let the belt fully retract.
Driver and Passenger Safety
57