Advertisement
3. Exchange of Spiral bevel gear 10
1) According to the exchange way of Armature in the abov e 2, take out Armature.
2) Make Armature nipped by Vise lightly, wrap it by rag to prevent from damage,nip the wrapped by plier , and loose n
Screw.
Armature axis and Inside of Gear are fixed by Right -handed screw (normal screw), and Gear is screwed directly to
Armature
3) In installing Gear, be sure to screw surely in the same way as 2)
Loosen
Tighten
Wrap by rag and nip by Plier
4. Exchange of Spiral bevel gear 38
1) Remove Wheel and Wheel cover respectively.
2) Remove Screw M4x16 fixing Bearing box complete by
3) Spiral bevel gear 38 is just press-fit in Spindle. D isassemble and assemble as shown in the illustration below.
Disassembly
Press Spindle end face by Arbor press of 15" or more
Wrap by rag
Insert lightly in Vise
Driver.
70more
Existing Ring
Assembly
12more
Advertisement
