Introduction; Notice; Models - Honeywell MORLEY IAS DX Series User Manual

Dimension Series

1 Introduction

1.1 Notice

•
The material and instructions covered in this manual have been carefully checked for accuracy and
are presumed to be correct. However, the manufacturer assumes no responsibility for inaccuracies
and reserves the right to modify and revise this document without
notice.
•
These instructions cover the use and operation of the Dimension
Series Fire Alarm Control Panels. Refer to the Product Manual (P/N 996-147-000) for details of how to
install, program and maintain the system.
•
The DX1, DX2 and DX4 Fire Alarm Control Panels are 1, 2 and 4 loop panels for use with analogue
addressable devices from the following detector manufacturer ranges:

1.2 Models

•
The Dimension Series Fire Alarm Control Panels are available in a range of enclosure sizes. A printer
is available as a factory fit option on all models except for the small enclosure. This manual covers the
following models:
Model No. of Loops
DX1e-20S
DX1e-40M
DX2e-40M
DX4e-40L
= A printer cannot be fitted in this enclosure
Note: A printer may be fitted as a retrofit item
User Manual
Enclosure
1 Small
1 Medium
2 Medium
4 Large
Document No.996-148-000-5, Revision: 5
For use with software
version 3.00, or later.
Max. Battery Size
7Ah
12Ah
12Ah
17Ah
MORLEY-IAS
S90
No. of Zones
20
40
40
40
Page 1