Honeywell MORLEY IAS DX Series User Manual page 34

Dimension Series
•
To disable or enable a type of output circuit, press '4' and the display shows a menu of the types of
outputs. For example:
[U0 Disable/Enable]
•
It is possible to enable or disable:
1. ALL Sounder Type Outputs.
2. ALL Fault Relay Type Outputs.
3. ALL Other Relay and Control Type Outputs
•
NOTE: The 'Sounder' device setting is used to differentiate between Sounder Type Outputs and
Other/Control Type Outputs. Refer to the Product Manual for more information.
•
Press '1', '2' or '3' are as required. The display then shows the following if the outputs are currently
enabled.
Disable ALL Sounder Outputs
Press
Disable ALL Fault Relay Outputs
Press
Disable ALL Relay and CTL Outputs
Press
•
The display shows the following if the outputs are currently disabled.
Enable ALL Sounder Outputs
Press
Enable ALL Fault Relay Outputs
Press
Enable ALL Relay and CTL Outputs
Press
•
Press the ' ' key to confirm the enable / disable action and return to the enable / disable outputs
menu.
•
Press 'X' to return to the enable / disable outputs menu without making a change.
User Manual
1:Sounders
2:Fault Relays
to Confirm
to Confirm
to Confirm
to Confirm
to Confirm
to Confirm
Document No.996-148-000-5, Revision: 5
3:Others
X:Cancel
X:Cancel
X:Cancel
X:Cancel
X:Cancel
X:Cancel
MORLEY-IAS
Page 29