Table of Contents
Advertisement
Chapter 6. Menu Options
Keyboard/Mouse
Host Interface
Enables a certain interface the mouse is connected to. You can choose between "Auto"
for automatic detection, "USB" for a USB mouse and "PS/2" for a PS/2 mouse.
To use the USB and/or PS/2 interface you need a correct cabling be-
tween the managed host and the managing device. If the managed host
has no USB keyboard support in the BIOS and you have connected the
USB cable only then you will have no remote keyboard access during
the boot process of the host. If USB and PS/2 are both connected and
you selected "Auto" as host interface, then the card will select "USB" if
available or otherwise falls back to "PS/2".
To get USB remote keyboard access during the boot process of the host, the following
conditions must be fulfilled:
the host BIOS must have USB keyboard support
•
68
Figure 6-24. Keyboard and Mouse Settings
Warning
Advertisement
Table of Contents
