Advertisement
Quick Links
windham
side table
style # WNSIDTBLRD (red)
dpci # 249-16-0739
tcin # 14122477
style # WNSIDTBLGY (gray)
dpci # 249-16-0727
tcin # 14373267
style # WNSIDTBLWH (white)
dpci # 249-16-0718
tcin # 14372250
style # WNSIDTBLBL (teal)
dpci # 249-16-0729
tcin # 14373230
>>
assembly instructions
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
Advertisement
Related Manuals for Target windham WNSIDTBLRD
Summary of Contents for Target windham WNSIDTBLRD
- Page 1 # 14373267 style # WNSIDTBLWH (white) dpci # 249-16-0718 tcin # 14372250 style # WNSIDTBLBL (teal) dpci # 249-16-0729 tcin # 14373230 >> assembly instructions © 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
-
Page 2: Before You Begin
Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. - Page 3 table of contents introduction hardware parts list how to use the cam lock system assembly 7-12 QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.
- Page 4 hardware (H1) x 12 (H2) x 14 (H3) x 14 (H4) x 8 (H5) x 1 wooden dowel cam bolt flat head screw knob bolt (H6) x 1 knob...
-
Page 5: Exploded Diagram
exploded diagram ITEM DESCRIPTION QUANTITY top panel right side panel left side panel back panel shelf drawer face drawer bottom drawer back drawer right side drawer left side top trim bottom trim... -
Page 6: How To Use The Cam Lock System
how to use the cam lock system Screw cam bolt into panel Align cam bolt(s) with cam(s) Push cam into panel - arrow feature and insert all the way into on cam top points to panel edge cross-bored hole(s) Rotate cam(s) clockwise 180° to Panels should be tight against each lock panels together other and connection should be rigid... - Page 7 step 1: attach shelf/back panel/bottom trim/top trim to left side panel (H1) x 4 (H2) x 5 (H3) x 5 wooden dowel cam bolt 1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 1.2.
- Page 8 step 2: attach right side panel (H1) x 4 (H2) x 5 (H3) x 5 wooden dowel cam bolt 2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 2.2.
- Page 9 step 3: attach top panel (H1) x 4 (H2) x 4 (H3) x 4 wooden dowel cam bolt 3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 3.2. Screw-In cam bolts must be screwed down flush. 3.3.
- Page 10 step 4: attach drawer left and right sides to drawer face (H4) x 4 flat head screw 4.1. Align screws with pre-drilled holes. 4.2. Do not over tighten screws.
- Page 11 step 5: attach drawer bottom, drawer back and knob (H4) x 4 (H5) x 1 (H6) x 1 flat head knob bolt knob screw 5.1. Align screws and bolt with pre-drilled holes. 5.2. Do not over tighten screws and bolt.
- Page 12 step 6: install drawer...
- Page 13 1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury. 2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed. QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service.
- Page 14 © 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.