Care And Cleaning - Breville Anthony Worall Thompson VBL030 Manual

care and cleaning

Always unplug your Intelligent Blender before cleaning it.
Your blender's blades are very sharp! Take care when cleaning your blender.
Never immerse the motor base unit, mains lead or plug in water or any other liquid.
Never use harsh abrasive cleaners or cleaning materials.
1. Remove the lid of your blender and fill the jug about one third full with lukewarm water. Add
one drop of washing up liquid.
. Replace the blending jug lid and stopper.
. Press the Pulse button  or  times.
. Empty the jug and rinse it under running water. More stubborn food depsits can be removed
using a nylon washing up brush.
Thoroughly dry the jug, lid and stopper before storing. Always ensure that the base of the jug
is dry before using it again.
Wipe the motor base over with a soft damp cloth then dry it using a clean absorbent, dry
cloth.
The blades can be removed from the bottom of the blending jug by using the removable
stopper as a tool to loosen them. This will not normally be required as the cleaning method
described above should be adequate. If you do decide to remove the blades you must
ensure that they are refitted correctly and fully tightened to prevent leakage.
16