Makita Makstar BPB180 Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature
DISASSEMBLING
1. Remove brush holder cap and carbon brush. (Fig. 2)
2. Disassemble saw guard and saw guard holder by unscrewing four bind CT4x20 tapping screws. (Fig. 2)
3. Disassemble rear wheel cover together with gear housing by unscrewing the following screws. (Fig. 2)
* Tapping Screw 5x25: 2 pcs.
* Tapping Screw 4x40: 2 pcs.
* Tapping Screw 4x55: 2 pcs.
4. Striking gear housing with plastic hammer, disassemble gear housing and rear wheel cover. Armature can be
removed from motor section. (Fig. 3)
5. Striking gear housing with plastic hammer, remove armature from it. (Fig. 4)
Fig. 2
Brush Holder Cap
Carbon Brush
Fig. 3
Gear Housing
Rear Wheel Cover
ASSEMBLING
Do the reverse step of disassembling.
for securing handle to rear wheel cover
for securing rear wheel cover and gear housing to motor section
Rear Wheel Cover
Gear Housing
Saw Guard Holder
Tapping Screw
5x25: 2 pcs.
Fig. 4
Armature
Gear Housing
P 3 / 10
Tapping Screw
4x40: 2 pcs.
Tapping Screw
4x55: 2 pcs.
Do not remove this tapping
screw 4x40 in this step.
Saw Guard
Saw Guard Holder
Tapping Screw
Bind CT4x20 :4 pcs.
Armature