Table of Contents
Advertisement
Installation
2.4 Conduit connections
The DirectLine provides a male ½" NPT thread to accommodate a customer conduit
connection. Use ½" conduit coupling (min. 38.1mm (1.5") long) on DL conduit
connection to clear cordset connector. Conduit can not be used with field wiring
connector (see Figure 2-2) due to size restriction.
Do not exceed 200in-lb. torque when attaching fixed piping.
Use wrench flats provided under the ½" NPT threads to support the DirectLine
during installation.
12
DirectLine® DL424/425 Sensor Module User Manual
9/11
Advertisement
Table of Contents
