Advertisement
Install the new motor
to the motor plate.
Insert the screws in
the 2 screw holes such
that the screws, motor
and bushing are all in
a straight line. (See
picture). The other holes
remain empty.
Install the motor/motor
plate into the gearbox
housing.
Tighten the screws in an
X pattern to ensure even
tension.
www.baratza.com
Pg. 4
Motor screws
Fourth screw
behind motor
support@baratza.com
Motor screws, motor shaft,
and bushing for drive shaft
form a line.
rev. 4/16/2019
Advertisement
