Table of Contents
Advertisement
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck.
Preparation for recording
1
Load a recordable tape with the open side up
and the full spool to the right.
2
Prepare the source to the recorded.
DISC – load the disc(s)
TUNER – tune to the desired radio station.
USB – connect a compatible USB device.
When recording is in progress
1
Press SOURCE on the set or DISC, TUNER
or USB/MP3 LINK on the remote as desired
source.
2
Start to play the selected source.
3
Press ● to start recording.
To stop recording
● Press 7 0 on the set.
Disc synchro recording
1
Select DISC source.
●
You can record programmed tracks in the order
you want.
2
Press ● to start recording.
Selecting another track during recording
1
Press ; to interrupt recording.
2
S / T
Press
to select another track.
3
Press ; to resume recording.
To stop recording
●
Press 7 0 on the set.
➜ Recording will stop.
IMPOTANT!
The making of unauthorized copies of copy-
protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal
offence. This equipment should not be used
for such purposes.
Tuning to radio stations
1
Press SOURCE on the set repeatedly or
TUNER on the remote until the desired
waveband is displayed.
2
Press and hold SEARCH
the button.
➜
The radio automatically tunes to a station
with sufficient reception.
3
Repeat Step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press SEARCH
/
T
briefly and repeatedly until you have found
optimal reception.
●
For FM, extend, incline and turn the telescopic
antenna. Reduce its length if the signal is too
strong.
Programming radio stations
You can store 20 FM radio stations in the memory
manually or automatically (Auto store).
Automatic programming
Press and hold PROG for more than three
seconds to activate programming.
➜
All available stations are programmed.
Manual programming
1
Tune to your desired station (refer to "Tuning to
radio stations").
2
Press PROG to activate programming.
➜
PROG flashes on the display.
3
Press í/ë to allocate a number (FM: from 1
to 20)
4
Press PROG again to confirm the setting.
➜
SAVE appears.
5
Repeat the above four steps to store other stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press ALBUM/PRESET+/- on the set or í/
ë on the remote until the desired preset
station is displayed.
Tuner
/
and release
S
T
S
31
Advertisement
Table of Contents
Troubleshooting
