FWD18 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Remote control AC power cord Composite Video Cable (without batteries) Audio cable User Manual Quick Start Guide...
Page 2
Connect the speaker cables. Connect the composite video cable to a TV. Connect the power supplies of the system and TV. Television Speaker FM wire antenna Setting up the TV STANDBY-ON B Press to switch on the set. Press SOURCE (DISC on the remote) to select disc source.
Setting the clock In standby mode, press and hold CLOCK When the hour digits flash, press VOLUME +/- remote to set the hours. Press again and the minute digits flash. Then press CLOCK panel or on the remote to set the minutes. VOL +/- Press again to confirm the time setting.
(requires an additional card reader to on the front panel of the main set. on the remote control) to select USB. USB/MP3 LINK C Royal Philips Electronics N.V. 2008 All rights reserved. http://www.philips.com - The system only supports audio files stored in the USB device.