Makita CL183D Instruction Manual page 6

1
2
► 1. Prefilter 2. Capsule
Remove accumulated dust from inside of capsule and
off of prefilter.
► 1. Prefilter 2. Securing lip
Twist prefilter in direction of arrow to unfasten securing
lip from cleaner unit and then pull off prefilter.
1
► 1. Prefilter 2. Filter
Clean out fine dust from prefilter. Next, remove filter,
and lightly tap to dislodge dust.
► 1. Prefilter 2. Filter
First, put filter without being peeled back. If filter is put
on incorrectly, dust will get into motor housing, and
cause motor failure. Second, put prefilter over filter.
1
2
► 1. Securing lip
2
Turn the set of filters, and adjust the position of the two
securing lips on prefilter, and connect with the gutters of
the cleaner housing.
► 1. Alignment marks
6 ENGLISH
Reassembly
1
1
1
2
1