Control Modes And Indication; Figure 10: Manual Mode - GE Lullaby Warmer Maintenance And Service Manual

1.4

Control Modes and Indication

Lullaby Warmer has two control modes, Manual Mode and Baby Mode (Baby Mode is also
TM
referred to as Servo Mode). In the Manual Mode, the warmer controls radiant heater output from a
heater power percentage setting that the user enters using the control panel. In the Baby Mode,
the warmer controls radiant heater output based on temperature readings from a probe attached
to the baby's skin and a set temperature the user enters using the control panel.
1.4.1 Manual Mode
Illustration
Increase/ Decrease Keys

Figure 10: Manual Mode

WARNING: -
Do not leave baby unattended while the Lullaby
Whenever possible, use the warmer in the Baby Mode. The Manual Mode requires
constant monitoring of the baby's condition by the caregiver.
6 2042376-001 Rev G
Baby
Temperature
Display
Manual Mode
Indication
Manual
Mode Key
©2012 General Electric Company. All rights reserved. Lullaby
Description
Manual Mode- Setting heater power

Lullaby
TM
the Manual Mode with a
default 100% heater output
setting after a systematic
power down.

The Manual
indicated
indicator located above the
Manual Mode key as seen in
the figure.

The percentage of full heater
output can be adjusted in 5%
increments
Temperature
increase/decrease
which are between the two
control mode keys. Heater
output increments show up
in the bar graph as lit up
LEDs.

The baby's skin temperature
may be monitored with a
skin probe in Manual Mode.
In Manual Mode this does not
control heater output.

If the user intends to use
Manual Mode for a prolonged
period of time, a skin probe
should be attached to the
baby.
Warmer is in Manual Mode.
TM
Warmer starts in
Mode is
by the green
using the
keys,
Warmer
TM