7.1.20 Replacing The Plate Power Inlet; Figure 98: Replacing The Plate Power Inlet - GE Lullaby Warmer Maintenance And Service Manual

7.1.20 Replacing the Plate Power Inlet

Illustration
NOTE: For Warmer with halogen lamp and transformer.
NOTE: For Warmer with SMPS and LED observation lamp

Figure 98: Replacing the Plate Power Inlet

Description
Instructions to replace Plate Power Inlet:
1. Remove the pillar rear top cover.
2. Remove the screws (4 numbers) to remove the power inlet plate from the pillar.
Lullaby Warmer
TM
2042376-001 Rev G ©2012 General Electric Company. All rights reserved. 93