Multipoint Calibration - HIKVISION DS-PRI120 User Manual

Note
When the PTZ position updates, you need to compare the radar position with the radar
position updated in step b. If the radar position of the two are inconsistent, go to step 4
again.
Note
• When calibrating, if the white track of the calibration staff moves, click the calibration point in
the list on the right, the radar position will update; if you adjust the PTZ buttons in the live
view window, the PTZ position of the speed dome will update.
• Before the calibration point is saved, the operation staff is not allowed to adjust the PTZ
buttons in the live view window (Adjustment will change the PTZ position, and results in an
incorrect calibration).
5. Click Save.

5.5.2 Multipoint Calibration

Before You Start
Arrange a staff (Operation staff) to perform the calibration operation in the client software, and a
staff (Calibration staff) to cooperate with the calibration.
Security Radar User Manual
Figure 5-13 Get the PTZ position
27