HIKVISION DS-PRI120 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security System
  5. DS-PRI120
  6. User manual

HIKVISION DS-PRI120 User Manual

Security radar
Hide thumbs Also See for DS-PRI120:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-PRI120
Security Radar
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-PRI120

Summary of Contents for HIKVISION DS-PRI120

  • Page 1 DS-PRI120 Security Radar User Manual...

  • Page 2: Legal Information

    MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS...

  • Page 3: Symbol Conventions

    DS-PRI120 Security Radar User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could result in death or Danger serious injury.

  • Page 4: Table Of Contents

    DS-PRI120 Security Radar User Manual Contents Legal Information ............................2 About this Manual ............................2 Trademarks ..............................2 Disclaimer ................................ 2 Symbol Conventions............................3 Chapter 1 Access to Client Software/Web Client ..................7 Chapter 2 Activation ..........................8 2.1 Activate Device via Client Software ......................8 2.2 Activate via SADP ............................
  • Page 5 DS-PRI120 Security Radar User Manual 5.3.1 One Point Calibration ........................32 5.3.2 Multipoint Calibration ........................35 5.4 Set Park Function for Linked Camera ...................... 37 5.5 Link the Camera to the Zone ........................38 5.6 Pop-up Alarm Notification ........................39 Chapter 6 Calibrating via Radar Calibration Tool ..................
  • Page 6 DS-PRI120 Security Radar User Manual 9.4 Set Frequency Range Settings ......................... 52 9.5 Track Settings ............................52 Chapter 10 View Alarm Information ......................53 Chapter 11 System Management ......................54 11.1 Set Time............................54 11.2 Manage User ..........................54 11.3 System Maintenance ........................

  • Page 7: Chapter 1 Access To Client Software/Web Client

    DS-PRI120 Security Radar User Manual Chapter 1 Access to Client Software/Web Client You can log in to the Client Software or the Web client to configure the device’s parameters. You can also configure the radar’s network parameters, alarm, permission, system, and search logs via the Web client.

  • Page 8: Chapter 2 Activation

    Before You Start • Get the iVMS-4200 client software from the supplied disk or the official Website http:// www.hikvision.com/en/. Install the software by following the prompts. • The device and the PC running the software should be in the same subnet.
  • Page 9 DS-PRI120 Security Radar User Manual Before You Start • Get the SADP software from the supplied disk or the official Website http:// www.hikvision.com/en/, and install the SADP according to the prompts. • The device and the PC runing the SADP tool should be within the same subnet.

  • Page 10: Activate Device Via Web Browser

    DS-PRI120 Security Radar User Manual 2.3 Activate Device via Web Browser Use a Web browser to activate the device. Use SADP software or PC client to search for online devices to get the IP address of the device, and activate the device on the Web page.

  • Page 11: Chapter 3 Wired Network Settings

    DS-PRI120 Security Radar User Manual Chapter 3 Wired Network Settings You can set the device IP address and other network parameters. Functions vary depending on the device model. 1. In the client software, enter Device Management page. 2. Select the device in the Device for Management list, click 3.

  • Page 12: Chapter 4 Radar Settings

    DS-PRI120 Security Radar User Manual Chapter 4 Radar Settings You can add zones, and set camera tracking parameters for the radar in the client software or Web client. 4.1 Radar Settings in the Web Client Edit maps, radars, zones and trigger lines in Web client.

  • Page 13: Add Zones

    DS-PRI120 Security Radar User Manual Figure 4-1 Edit Scale Range is the predicted distance range of system. Enter the number for this range. 9. Click OK. 10. Adjust the radar position. Drag the sector to make the radar detection area cover the required filed. You can rotate the sector with the icon on the arc side of the sector.
  • Page 14 DS-PRI120 Security Radar User Manual Figure 4-3 Overlap zones 6. Right-click to complete drawing, and the system will pop up a window. Enter the zone name, and select Early Warning Zone, Warning Zone, or Disabled Zone as the zone type.

  • Page 15: Add Trigger Line

    DS-PRI120 Security Radar User Manual Figure 4-5 Drag a Marker 4) Hold to move the zone. Figure 4-6 Move the Zone 5) Click outside the zone to exit the zone editing mode. To delete a zone, click in the zone editing mode.
  • Page 16 DS-PRI120 Security Radar User Manual 5. Draw the trigger line. 1) Click on the radar detection area to draw a trigger line. 2) Select Left -> Right, Left <- Right or Left <-> Right in the pop-up window. 3) Enter the distance between two lines (only for Dual-trigger Line).

  • Page 17: Radar Settings In The Client Software

    DS-PRI120 Security Radar User Manual Figure 4-10 Move the Trigger Line • Edit: Click to edit the trigger line name, trigger line rule, and distance (only for Dual-trigger Line). • Delete: Click to delete the trigger line. 4.2 Radar Settings in the Client Software Edit radar parameters in client software.

  • Page 18: Add The Radar To The Map

    DS-PRI120 Security Radar User Manual Range is the predicted distance range of system. Enter the number for this range. Figure 4-12 Edit Scale 7. Click OK. 4.2.2 Add the Radar to the Map After adding the map, you need to add a radar to the map.
  • Page 19 DS-PRI120 Security Radar User Manual 4. Optional: Click to delete radar or click to edit radar parameters: Menu Description Hot Spot Name Radar name Hot Spot Color Color of radar name Hot Spot Icon The default icon cannot be changed Apply to Other Radar Hot Spots After checking, the changes will be synchronized to other radars.
  • Page 20 DS-PRI120 Security Radar User Manual Figure 4-15 Confirm Terminals 4) Click on the map to confirm the actual locations of marker 1 and marker 2. Figure 4-16 Confirm Actual Locations 5) Click OK on pop-up window. The system will automatically match the markers to the actual locations.

  • Page 21: Add Radar Zone

    DS-PRI120 Security Radar User Manual Figure 4-17 Finish Map Calibration 6) Click Radar Settings → End Map Calibration. 4.2.3 Add Radar Zone Before You Start You need to disarm the radar before the operation. Click Finish in the E-map page to exit the editing mode.
  • Page 22 DS-PRI120 Security Radar User Manual Figure 4-18 Draw a Zone Adding zones is a batch operation. If you add zones only to one radar, you need to right-click on the remaining radar detection zones and click Cancel. Zones can overlap. The priority of the effective overlapping zone is: Disabled Zone>Warning Zone>Early Warning Zone.
  • Page 23 DS-PRI120 Security Radar User Manual • Warning Zone: The warning zone will identify the targets entering the area and trigger alarm. The warning zone is orange. • Disabled Zone: The disabled zone will block the target track in the area. The disabled zone is gray.

  • Page 24: Add Trigger Line

    DS-PRI120 Security Radar User Manual Figure 4-22 Move the Zone 5) Click outside the zone to exit the zone editing mode. To delete a zone, click in the zone editing mode. To edit the zone name and the zone type, click in the zone editing mode.
  • Page 25 DS-PRI120 Security Radar User Manual Direction determination: Set the starting point as the center of the circle, the trigger line is clockwise to the right, and counterclockwise to the left. Up to four trigger lines can be drawn. Up to one dual-trigger line can be drawn.

  • Page 26: Other Auxiliary Functions

    DS-PRI120 Security Radar User Manual Figure 4-26 Drag a Marker • Move the Trigger Line: Hold the editing area to move the trigger line. Figure 4-27 Move the Trigger Line • Edit: Click to edit the trigger line name, trigger line rule, and distance (only for Dual-trigger Line).

  • Page 27: Chapter 5 Camera Linkage Settings

    DS-PRI120 Security Radar User Manual Chapter 5 Camera Linkage Settings The radar can work with cameras such as speed dome and box camera for target tracking and video recording. 5.1 Set Speed Dome Initial Position Set the initial position of the speed dome to ensure the tracking accuracy.

  • Page 28: Link The Camera To The Radar

    DS-PRI120 Security Radar User Manual Figure 5-2 Set Initial Position 5.2 Link the Camera to the Radar Before You Start Click Finish in the E-map page to exit the editing mode. Click on the radar icon and select Disarm to disarm the radar.

  • Page 29: Calibrate Camera

    DS-PRI120 Security Radar User Manual Figure 5-3 Add a Camera 3) Click OK. 3. Link zones and trigger lines to the camera. 1) Select a camera in the camera list. 2) Select zones and trigger lines in the Linkage Settings.
  • Page 30 DS-PRI120 Security Radar User Manual 2. Select the group of the radar and click Ecoding Channels → Import . 3. Check cameras need to be calibrated and click Import. 4. Click E-map to enter the page and click Edit to enter the editing mode.
  • Page 31 DS-PRI120 Security Radar User Manual 9. Select a schedule for calibration point selection. According to the relative installation position of the radar and the camera, it is necessary to select a schedule for the calibration point selection (One-Point Calibration or Multi-Point Calibration).

  • Page 32: One Point Calibration

    DS-PRI120 Security Radar User Manual Figure 5-6 Installation Scene for Multi-Point Calibration 10. Calibrate the camera. According to the selected schedule, calibrate the camera by using one-point calibration or multi-point calibration. 5.3.1 One Point Calibration Before You Start Arrange a staff (Operation staff) member to perform the calibration operation in the client software, and a staff (calibration staff) person to cooperate with the calibration.
  • Page 33 DS-PRI120 Security Radar User Manual Figure 5-7 Select the Track 3. Ask the calibration staff to move to the calibration point within 20 to 40 m directly in front of the radar, and then stand at the calibration point. 4. Adjust the PTZ buttons in the live view window to get the PTZ position: Click + and - to adjust the altitude of...
  • Page 34 DS-PRI120 Security Radar User Manual Select the calibration point in the Information list, and you can click Delete to delete the calibration point. The track disappears if the calibration staff is standing in place for more than 7s. If the...

  • Page 35: Multipoint Calibration

    DS-PRI120 Security Radar User Manual 5.3.2 Multipoint Calibration Before You Start Arrange a staff (Operation staff) person to perform the calibration operation in the client software, and a staff (Calibration staff) person to cooperate with the calibration. 1. In the calibration page, select Multipoint Calibration as the calibration mode.
  • Page 36 DS-PRI120 Security Radar User Manual Figure 5-10 Multipoint Calibration Radar Page Every time a calibration point is calibrated completely, the operation staff should not adjust the PTZ buttons in the live view window (adjustment will change the PTZ position of the current calibration point and result in an incorrect calibration).

  • Page 37: Set Park Function For Linked Camera

    DS-PRI120 Security Radar User Manual 5.4 Set Park Function for Linked Camera After enabling the radar park mode, the main radar will control the camera to return to the set watch point if no target appears within 10 s in the radar detection area.

  • Page 38: Link The Camera To The Zone

    DS-PRI120 Security Radar User Manual 4. Use function buttons on the right to adjust the camera screen center position (cross icon position) to the watch point. You can click on the screen and the screen will automatically adjust to the clicked center.

  • Page 39: Pop-Up Alarm Notification

    DS-PRI120 Security Radar User Manual Figure 5-12 Link the Camera to the Zone 5. Click OK. 5.6 Pop-up Alarm Notification Before You Start • Link the camera to the zone. • Add the camera, the NVR and the radar to the client software.
  • Page 40 DS-PRI120 Security Radar User Manual Figure 5-13 The Alarm Window • Check Auto-Update Event, the window will automatically switch to the new alarm video and display the new alarm video in real time. • Click Previous or Next to view unread alarm messages.

  • Page 41: Chapter 6 Calibrating Via Radar Calibration Tool

    DS-PRI120 Security Radar User Manual Chapter 6 Calibrating via Radar Calibration Tool 6.1 Download and Registration Get Radar Calibration Tool and registration. Before You Start Download and install Radar Calibration Tool from official Website. 1. Open Radar Calibration Tool. 2. Click Register.

  • Page 42: One-Point Calibration

    DS-PRI120 Security Radar User Manual 6.3 One-Point Calibration Before You Start • Disarm the radar before the operation. • Add the camera in the radar list before calibration, and set the speed dome initial position. • The installation height of the linked speed dome should to be more than 3 m.

  • Page 43: Multi-Point Calibration

    DS-PRI120 Security Radar User Manual Figure 6-2 Add a Calibration 8. Click Save. 6.4 Multi-Point Calibration Enter a short description of your task here (optional). Before You Start Enter the prerequisites here (optional). Enter the context of your task here (optional).
  • Page 44 DS-PRI120 Security Radar User Manual Figure 6-3 Multipoint Distribution Instance At least four equally distributed calibration points are required with multi-point calibration. 5. According to the calibration points, ask the calibration staff to move to a calibration point, and refer to step 4 to step 7 in One-Point Calibration to calibrate the calibration point.

  • Page 45: Chapter 7 Set Record And Storage Settings

    DS-PRI120 Security Radar User Manual Chapter 7 Set Record and Storage Settings 7.1 Set Storage Settings You can use a storage server or NVR to store videos. 7.1.1 Set Storage Schedule via Storage Server Before You Start • Make sure your computer has already installed the Storage Server that should be selected as the component when installing client.

  • Page 46: Set Storage Schedule Via Nvr

    DS-PRI120 Security Radar User Manual 9. Click Save. For detailed settings, refer to the iVMS-4200 Client Software User Manual. 7.1.2 Set Storage Schedule via NVR 1. In the client software, click , or enter the IP address of radar in brower to enter the Web client.

  • Page 47: Chapter 8 Alarm Settings

    3. Select Protocol Type from the drop-down list, select Server Address Type from the drop-down list, enter the server address, port no., and the user name. The protocol type NAL2300 is the Hikvision private protocol. 4. Click Save. 8.2 Notification Push When an alarm is triggered, if you want the send the alarm notification to the client, alarm center, cloud, or mobile client, you can set the notification push parameters.

  • Page 48: Set Zone

    DS-PRI120 Security Radar User Manual Figure 8-2 Notification Push 2. Enable the target notification. • Alarm Event Notification: Device will push notifications when zone alarm is triggered or restored. • System Status Notification: Device will push notifications when any status in the system is changed.

  • Page 49: Set Arming/Disarming Schedule

    DS-PRI120 Security Radar User Manual Figure 8-4 Relay You can also click E-map → Edit → Radar Settings → Alarm Output to open/close the relay. 2. Select an relay, and click to enter the page. 3. Edit the relay name, and output time.

  • Page 50: Set Motion Speed

    DS-PRI120 Security Radar User Manual 2. Drag the mouse to draw the period bar on the time table, or click the period bar and enter the start and end time. You can set two arming/disarming periods each day. 3. Click OK to save.

  • Page 51: Chapter 9 Set Radar Advanced Function

    DS-PRI120 Security Radar User Manual Chapter 9 Set Radar Advanced Function 9.1 Set Master-Slave Tracking Settings If the radar needs multiple-radar linkage, you can arrange multiple radars for linkage detection and configure the radar master-slave relationship. Before You Start There must be at least two online radars.

  • Page 52: Set Frequency Range Settings

    DS-PRI120 Security Radar User Manual 2. Select Open Mode, Shrub Mode, or Expert Mode as the radar sensitivity mode. • Open Mode: There are no large objects in the radar detection area. • Shrub Mode: There are shrubs and other objects that are likely to swing in the radar detection area.

  • Page 53: Chapter 10 View Alarm Information

    DS-PRI120 Security Radar User Manual Chapter 10 View Alarm Information The device supports alarm information query and alarm event playback. Before You Start Record and storage settings are required before searching and playing back alarm events. For details, see Set Record and Storage Settings.

  • Page 54: Chapter 11 System Management

    DS-PRI120 Security Radar User Manual Chapter 11 System Management 11.1 Set Time 1. Select the radar and click in the client software, or enter the radar IP address in the address bar of the Web browser. Click System → Time to enter the page.

  • Page 55: System Maintenance

    DS-PRI120 Security Radar User Manual 11.3 System Maintenance You can reboot the device, restore default settings, import/export configuration file, or upgrade the device remotely. Select the device and click in the client software, or enter the device IP address in the address bar of the Web browser.

  • Page 56: Led Status

    DS-PRI120 Security Radar User Manual 11.7 LED Status You are able to enable LED function. Select the device and click in the client software, or enter the device IP address in the address bar of the Web browser. Click System → Device Status to enter the page and you can enable or disable the LED function.

  • Page 57: Appendix A. Radar Mounting Height Recommendation

    DS-PRI120 Security Radar User Manual Appendix A. Radar Mounting Height Recommendation The recommended installation height is 2 m to 3 m. The following table shows the detection range at different mounting heights. Figure A-1 Radar Mounting Height and Detection Range...

  • Page 58: Appendix B. Formatting Description

    DS-PRI120 Security Radar User Manual Appendix B. Formatting Description You can restore all parameters to default settings for formatting the security radar by the reset button. You can format the device as follows. 1. Power off the radar, and then hold the reset button while powering the radar on.

  • Page 59: Appendix C. Indicator Description

    DS-PRI120 Security Radar User Manual Appendix C. Indicator Description The indicator status description of the radar: Table C-1 Indicator Description Indicator Status Solid Green Radar Powered on Solid Red Zone Alarm Occurred Flashing Red and Green Radar Network Disconnection/Radar Sensor Exception When formatting, the red and green LED flashes six times, indicating that the formatting was successful.

  • Page 60: Appendix D. Faq

    DS-PRI120 Security Radar User Manual Appendix D. FAQ D.1 How to Achieve an Optimum Detection Range? Answer: You can refer to Radar Mounting Height Recommendation for installation of radar, and you should test the radar after installation to make sure it is properly mounted. The test method is as follows: You need to enable OSD function before testing.

  • Page 61: How To Solve The Problem That No Reference Point Is On The Frame While Setting The Speed Dome Initial Position

    DS-PRI120 Security Radar User Manual calibrating. If the calibration points are error, calibrate again. Check if the calibration positions are equally distributed when you set the multi-point calibration. Do not move the speed dome manually after the calibration. If the speed dome is manually moved, reset the initial position of the speed dome and calibrate again.

  • Page 62: What Is The Reason That Failed To Draw A Zone Automatically

    DS-PRI120 Security Radar User Manual 4. Adjust the cursor to Next Page in the sport mode menu and click , then adjust the cursor to Max Ele Angle (DEG) and click to enter the page. Figure D-3 Maximum Elevation Angle Adjustment 5.

  • Page 63: Why Is The Camera Unable To Track The Target

    DS-PRI120 Security Radar User Manual concentrated, there may be a false alarm when there is glass in the radar scene. The higher the sensitivity, the more probability to trigger a false alarm. D.9 Why Is the Camera Unable to Track the Target? •...

  • Page 64: Appendix E. Communication Matrix And Device Command

    Figure E-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision security control devices. Figure E-2 Device Command User Privacy Statement •...
  • Page 65 DS-PRI120 Security Radar User Manual Table E-1 User Privacy Information Description Password The password for the radar device account, used to log in to the device. Used to encrypt radar device configuration information. Username The username for the radar device account, used to log in to the device.
  • Page 66 DS-PRI120 Security Radar User Manual UM DS-PRI120 091720NA...

Table of Contents