Troubleshooting - Breville the Smart Dry Instruction Book

Table of Contents

Advertisement

Troubleshooting

TROUBLESHOOTING GUIDE
Before carrying out any of the following service checks, unplug the unit from the power outlet.
PROBLEM
Not working.
Dehumidification
strength has decreased.
Loud noises coming
from the dehumidifier.
The dehumidifier
suddenly stops.
Clothing dries very
slowly.
No reduction of
humidity in the room.
A noise keeps turning
on and off during
operation.
The dehumidifier seems
to shudder at times.
14
LAD300_200_ANZ_IB_B19.indd 14
POSSIBLE CAUSES
Power plug is disconnected.
The tank is full of water.
The tank is not in the right
position.
The filter is too dirty.
The air inlet or outlet is blocked.
The dehumidifier is on an
uneven surface.
The room temperature may
be outside of the zone of the
dehumidifier.
The room temperature is too
low.
The room is too large for the
unit.
Doors and/or windows in the
room are not closed.
Similar to a refrigerator noise,
the compressor will turn off and
on during operation.
The unit will shudder slightly as
the compressor turns on and off.
WHAT TO DO
Plug the power cord into the power
socket.
Empty the water tank.
Position the water tank correctly in the
unit.
Clean the filter.
Remove the object that is blocking the
air inlet or outlet.
Position the dehumidifier on a smooth
and stable surface.
The dehumidifier will start
automatically when it can read the room
temperature again.
If the room temperature is too low, the
clothing will dry slower than usual.
Move to a smaller room.
Close any doors or windows in the
room.
This is normal.
This is normal.
8/4/19 1:56 pm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

The smart dry plus

Table of Contents