Related Manuals for Breville the Smart Dry
Summary of Contents for Breville the Smart Dry
- Page 1 Smart Dry Dehumidifier & ™ Smart Dry Plus Dehumidifier ™ Instruction Book - LAD200 & LAD300 LAD300_200_ANZ_IB_B19.indd 1 8/4/19 1:56 pm...
-
Page 2: Table Of Contents
RECOMMENDS for household use only and not for commercial or industrial SAFETY FIRST use. Do not use outdoors. At Breville we are very safety • Always ensure the dehumidifier conscious. We design and is properly assembled before manufacture consumer use. Follow the instructions products with the safety of you, provided in this book. - Page 3 • Do not route the power cord in any manner. Return the under furniture or appliances. dehumidifier to your nearest • To protect against electrical Breville service centre for hazards, do not immerse any examination, electrical part of the dehumidifier in or mechanical adjustment water or other liquids.
- Page 4 ELECTRICAL damaged in any way. Return the entire appliance to the APPLIANCES nearest authorized Breville Service Centre for examination • Fully unwind the power cord and/or repair. before use. • Connect only to a 230V or 240V power outlet.
- Page 5 • Any maintenance other than inadvertently cause damage cleaning should be performed to the appliance and its at an authorised Breville electronic componentry. Service Centre. • Always turn the appliance to • This appliance is for the OFF position, switch off at household use only.
-
Page 6: Components
Components Front Back A. Control Panel Not pictured B. Air Outlet Power Cord C. Carry Handles Drainage Hose (gravity-fed) D. Housing Body Wheels E. Air Inlet and Filter Carbon Filter F. Water Tank Water Level Indicator G. Continuous Drainage Outlet Water Tank Lid (LAD300 only) LAD300_200_ANZ_IB_B19.indd 6 8/4/19 1:56 pm... -
Page 7: Control Panel
Control Panel HIGH DEFROST EMPTY SPEED NIGHT TIMER MODE HUMIDITY SETTING A. Fan Speed Display Screen Icons B. Low & High Fan Light Relative Humidity Level (%) C. Timer Timer D. Night Mode Ventilation Mode E. Humidity Setting Laundry F. Mode Continuous Dehumidification G. -
Page 8: Features
Assembly BEFORE FIRST USE WHAT IS A DEHUMIDIFIER? 1. Before using your dehumidifier for the first Your Breville dehumidifier is designed to time, remove all packaging material and reduce and maintain the level of humidity in promotional labels. the air, as well as to prevent condensation and mildew on the ceilings and walls. -
Page 9: Functions
HUMIDITY SETTING SENSAIR™ LIVE HUMIDITY CONTROL When the dehumidifier is turned on, the • Your Breville Smart Dry™ and Smart Dry Plus™ current humidity level (%) will show on the Dehumidifier has a built-in sensor to detect display screen and the % icon will illuminate. - Page 10 NOTE WARNING As a safety feature, the dehumidifier will The fan will only operate on Low speed in automatically turn off if the water tank is full, Continuous mode and on High speed in even if the countdown timer has not reached Laundry mode.
-
Page 11: Continuous Drainage
CONTINUOUS DRAINAGE DEFROST (hose drainage using gravity) This dehumidifier is equipped with an The continuous drainage outlet allows water automatic defrost. The evaporator may to drain without having to monitor and empty start auto-defrosting if operating in a room temperature that is less than 23°C. the water tank. -
Page 12: Care, Cleaning & Storage
3. To remove dirt that may have built up on 2. For the Smart Dry Plus™ Dehumidifier only the housing body and air inlet grille, wipe (LAD300) remove the lid before cleaning. - Page 13 FILTER CLEANING 2. To separate the mesh dust filter from the grille, pull outwards using the tab in the The air inlet grille at the back of the middle of the filter to disengage from the dehumidifier also acts as the filter holder. clips on the grille.
-
Page 14: Troubleshooting
Troubleshooting TROUBLESHOOTING GUIDE Before carrying out any of the following service checks, unplug the unit from the power outlet. PROBLEM POSSIBLE CAUSES WHAT TO DO • • Not working. Power plug is disconnected. Plug the power cord into the power socket. -
Page 15: Error Codes
ERROR CODE POSSIBLE CAUSES WHAT TO DO • • E2 is on the display The humidity sensor is not Contact Breville customer service. screen. working. • • E3 is on the display There is damage to the Contact Breville customer service. - Page 16 Web: www.breville.com Breville, the Breville logo, Master Every Moment, Smart Dry, Smart Dry Plus and SenSair are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928. Copyright Breville Pty. Ltd. 2019. Due to continued product improvement, the products illustrated/photographed in this booklet may vary slightly from the actual product.