Advertisement
92. At the audio unit opening, secure DIN cable "A" to
the vehicle harness with two wire ties.
WIRE TIES
DIN CABLE "A"
93. At the glove box opening, secure DIN cable "A" to the
vehicle harness with three wire ties.
WIRE TIES
GLOVE BOX
OPENING
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
AUDIO UNIT
OPENING
VEHICLE
HARNESS
820521A
VEHICLE HARNESS
DIN CABLE "A"
820522A
AII 50347 (1308)
94. Using isopropyl alcohol on a shop towel, clean the
area where the cushion tape will attach. Secure DIN
cable "A" to the vehicle panel with one cushion tape.
VEHICLE
CLIP
VEHICLE
HARNESS
DIN
CABLE "A"
CUSHION
TAPE
95. Secure DIN cable "A" to the vehicle harness with two
wire ties, and tighten the wire tie loosely secured in
step 45.
96. Remove the left and right lenses (eight retaining
tabs).
VEHICLE 3-PIN
CONNECTOR
4 RETAINING
TABS
LEFT LENS
97. Remove the rear interior light (two self-tapping
screws and unplug the vehicle 3-pin connector).
2 WIRE
TIES
DIN
CABLE "A"
VEHICLE
PANEL
WIRE TIE
Secure.
820523A
REAR INTERIOR
LIGHT
2 SELF-TAPPING
SCREWS
4 RETAINING
TABS
RIGHT LENS
FRONT
820524A
23 of 28
Advertisement
