Honda 08B23-SJC-100 Installation Instructions Manual page 22

88. Secure the i-VES harness and DIN cable "B" to the
vehicle harness with two wire ties. Go to step 92.
WIRE
TIE
VEHICLE
HARNESS
89. Pull back the floor carpet. Using isopropyl alcohol on
a shop towel, clean the areas where the cushion
tapes will attach. Secure the i-VES harness and the
DIN cables to the vehicle panel with two cushion
tapes.
FLOOR
CARPET
Pull back.
DIN
DIN
CABLE "A"
CABLE "B"
22 of 28
i-VES
HARNESS
FRONT
CUSHION
TAPES
VEHICLE
PANEL
i-VES
HARNESS
CUSHION
TAPE
90. Secure the i-VES harness and the DIN cables to the
vehicle harness with two wire ties.
WIRE
TIE
DIN
CABLE
"B"
WIRE
TIES
841026AB
91. Bundle the excess i-VES harness, and secure it to
the vehicle harness with one long wire tie.
LONG WIRE
TIE
i-VES HARNESS
820519A
AII 50347 (1308))
DIN CABLE "A"
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
FRONT
VEHICLE
HARNESS
i-VES
HARNESS
DIN
CABLE "B"
820520A
FRONT
VEHICLE
HARNESS
820544A