Advertisement
81. Lift the center console as shown, and secure the
DVD player bracket A to the center console with two
5 mm stepped bolts.
8 mm HOLE
Lift.
STEPPED BOLTS,
5 mm
82. Using isopropyl alcohol on a shop towel, clean the
areas where the cushion tapes will attach. Lift the
center console, and secure the i-VES harness and
the DIN cables to the vehicle panel with two cushion
tapes.
CENTER
CONSOLE
FRONT
CUSHION
TAPES
VEHICLE
BRACKET
83. Reinstall the center console.
20 of 28
CENTER
CONSOLE
FRONT
820517A
VEHICLE
PANEL
DIN
CABLE "A"
CUSHION
TAPE
i-VES
HARNESS
DIN CABLE "B"
820518A
If the vehicle connector at the audio unit opening is 20-pin,
continue with step 84. If the vehicle connector is 24-pin
connector, go to step 89.
84. Pull back the floor carpet. Using isopropyl alcohol on
a shop towel, clean the areas where the cushion
tapes will attach. Secure the i-VES harness and the
DIN cables to the vehicle panel with two cushion
tapes.
FLOOR
CARPET
Pull back.
DIN
CABLE "A"
AII 50347 (1308))
FRONT
CUSHION
TAPES
i-VES
HARNESS
CUSHION
TAPE
DIN
CABLE "B"
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE
PANEL
841022AB
Advertisement
