Preface - Cisco 7300-1OC12POS-MM Installation And Configuration Manual

Preface

This preface describes the objectives and organization of this document and explains how to find
additional information on related products and services. This preface contains the following sections:
•
•
•
•
•
Objectives
This document describes how to install and configure the single-port OC12 Packet over SONET (POS)
line cards (7300-1OC12POS-MM[=], 7300-1OC12POS-SMI[=], and 7300-1OC12POS-SML[=]), and the
2-port OC12 Packet over SONET (POS) line cards (7300-2OC12POS-MM[=], 7300-2OC12POS-SMI[=],
and 7300-1OC12POS-SML[=]), hereafter referred to as the OC12 POS line cards, which are used in the
Cisco 7304 router.
Organization
This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
OL-3437-01
Objectives, page 7
Organization, page 7
Related Documentation, page 8
Obtaining Documentation, page 8
Obtaining Technical Assistance, page 9
Title
Overview
Preparing for Installation
Removing and Installing Line Cards
Configuring the OC12 POS Line Card
Description
Describes the OC12 POS line cards and their
LED displays, cables, and receptacles.
Describes safety considerations, tools required,
and procedures you should perform before the
actual installation.
Describes the procedures for installing and
removing the OC12 POS line cards in the
supported platform.
Provides instructions for configuring the
OC12 POS line cards on the supported platform.
OC12 Packet Over SONET Line Card Installation and Configuration
7