Intended Use; Ec Declaration Of Conformity - Makita DUT130 Instruction Manual

Read instruction manual.
Do not use the tool in the rain.
Do not clean the tool with water.
Ni-MH Only
Li-ion
Do
battery
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment
and
and Waste Batteries and
Accumulators and their implementation in
accordance with
electric
batteries
pack(s)
reached the end of their life must be
collected
returned
environmentally
compatible recycling

Intended use

The tool is intended for mixing wall materials, etc.
(except flammable materials).
Noise
The typical A-weightednoise
determined according to EN60745-2-1:
Model DUT130
Sound pressure level (L
Uncertainty (K) :
Model DUT131
Sound pressure level (L
Uncertainty (K) :
The noise level
may exceed 80
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be
comparing one
another.
NOTE: The declared
value(s) may
used in
preliminary assessment
exposure.
for
not dispose
EU
pack together
electric equipment
household waste
and Batteries
Accumulators
national laws,
equipment and
and battery
that have
separately and
to an
facility.
level
) : 74 dB(A)
pA
3 dB(A)
) : 74 dB(A)
pA
3 dB(A)
under working
dB (A).
used for
tool with
noise emission
also be
a
of
WARNING:
WARNING:
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool
is used especially what kind of workpiece is
processed.
WARNING:
measures to protect the operator that are based
of
on an estimation of exposure in the actual
with
or
conditions of use (taking account of all parts of
the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-1:
Model DUT130
Work mode: operation without load
Vibration emission (a
Uncertainty (K)
Model DUT131
Work mode: operation without load
Vibration emission (a
Uncertainty (K)
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may
comparing one
another.
NOTE: The
value(s)
used
preliminary assessment
exposure.
WARNING:
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
measures to protect the operator that are based
on an estimation of exposure in the actual
conditions of use (taking account of all parts of
the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).

EC Declaration of Conformity

For European countries only
The EC
is included
to this instruction manual.
7 ENGLISH
Wear ear protection.
The noise emission during actual
Be sure to identify safety
) : 2.5 m/s 2 or less
h
: 1.5
2
) : 2.5 m/s or less
h
: 1.5
be used
tool
declared vibration
may also
in a
The vibration emission during
Be sure to identify safety
declaration of
as Annex
m/s 2
2
m/s
for
with
total
be
of
conformity
A