Operation; Maintenance; Optional Accessories - Makita DUT130 Instruction Manual

CAUTION:
Always remove the battery when
hanging the tool with the hook.
CAUTION:
Never hook the tool at high
location or on potentially unstable surface.
►
Fig.14: 1. Groove 2. Hook 3. Screw
The hook is
temporarily hanging the
This can be installed on either side of the tool. To
install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
Installing or removing the shaft
holder
Optional accessory
For DUT131
1. Insert the hex wrench into the chuck, and
then loosen the chuck with the hex wrench while
holding the spindle with the wrench.
►
Fig.15: 1. Hex wrench 2. Chuck 3. Wrench
2. Tighten the shaft holder with a wrench while
holding the spindle with another wrench.
►
Fig.16: 1. Shaft holder 2. Wrench
To remove the shaft holder, perform the installation
procedure in reverse.

OPERATION

CAUTION:
Do not mix flammable materials or
operate the tool around flammable materials such
as paint with thinner used as solvent. Failure to do
so may
CAUTION:
Do not mix high viscosity material,
such as mortar or adhesive, in the high speed
mode. You
control
and
NOTICE:
When you mix the material while the
mixing blade floating out of the material, be
careful not to splash the material.
1. Select high speed or low speed according to
the material to be mixed.
2. Hold the rear handle of the tool with one
hand and the grip
other hand
the mixing
material fully
on the
making sure
safety.
farklılık gösterebilir.
convenient for
tool.
cause an injury.
may lose the
of the tool
cause an injury.
with the
firmly, place
blade under
and turn
tool after
work site
3. Move the mixing blade up and down during
the mixing operation so that whole part of material can
be mixed.
4. When
off
sure
to a complete stop, and then pull it out of the mixing
container.

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any
or adjustment should
by Makita
Service Centers,
replacement
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual.
of
accessories or attachments might present
a risk of injury
use
attachment for its stated purpose.
If you
assistance for
these accessories,
local Makita
•
Mixing blade
•
Shaft
•
Shaft holder
•
Hook
•
Makita
charger
NOTE: Some
list
in
as
They
country
12 ENGLISH
finishing mixing, turn
the tool, make
that the mixing blade has come
other maintenance
be performed
Authorized or Factory
always using Makita
parts.
The
any other
to persons.
accessory or
need any
more details regarding
ask your
Service Center.
genuine battery and
items in the
may be included
the tool package
standard accessories.
may differ from
to country.
use
Only