Intended use 9. Use appropriate tool Your Black & Decker shear/trimmer has been designed for The intended use is described in this instruction manual. trimming grass, hedges, shrubs and brambles. This tool is Do not force small tools or attachments to do the job of a intended for consumer use only.
Do not store in locations where the temperature may exceed 40 °C. Wear ear protection when operating this tool. Charge only at ambient temperatures between 4 °C and 40 °C. Charge only using the charger provided with the tool. Wear gloves when operating this tool. When disposing of batteries, follow the instructions given in the section “Protecting the environment”.
Page 6
4. Shear blade (GL602/GL605) Release the lock-off button. 5. Trim blade (GS721/GL605) Switching off Assembly Release the switch (1). Warning! Avoid accidentally switching the tool on during assembly. Warning! Never attempt to lock the switch in the on position. GL605 - Fitting and removing the blade (fig. A)
Warning! Once removed, the battery cannot be refitted. temperature must always remain in the range of +5 °C to Technical data +40 °C. Before using the tool after prolonged storage, fully charge GL602 GS721 GL605 the battery again. Voltage 1100 Blade strokes (no load)
EC declaration of conformity GL602/GS721/GL605 Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, EN 60335, EN 774, CEN/1C144/N238 Kevin Hewitt Director of Consumer Engineering Spennymoor, County Durham DL16 6JG, United Kingdom 1-12-2005 Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee.