Intended use If operating a power tool in a damp location is ENGLISH unavoidable, use a Residual Current Device (RCD) Your Black & Decker Alligator Lopper has been designed protected supply. Use of an RCD reduces the risk of for trimming the branches of trees, cutting fallen branches electric shock.
Page 10
d. Store idle power tools out of the reach of children Additional power tool safety warnings and do not allow persons unfamiliar with the power Warning! Additional safety warnings for the tool or these instructions to operate the power tool. Alligator Lopper.
Page 11
Keep your saw chain properly tensioned. Check tension Labels on tools at regular intervals with the motor stopped and cord disconnected. Warning! To reduce the risk of injury, the user Begin and continue cutting only with the chain moving at ...
Page 12
Charge only using the charger provided with the If the supply cord is damaged, it must be replaced by the appliance/tool. Using the wrong charger could result in manufacturer or an authorised Black & Decker Service an electric shock or overheating of the battery. Centre in order to avoid a hazard.
Page 13
Checking and adjusting the saw chain tension (fig. C) locator, angle the chain guide bar (3) down ensuring it is correctly located. To tension the saw chain (14) slacken the two chain cover Place the saw chain (14) around the front of the chain retention bolts (12) with the spanner (13) and the chain ...
Preparation Remove the tool from the cut while it is running at full Carry out regular cleaning of the unit as described in the speed. maintenance section and in particular cleaning inside Maintenance the chain access cover (11). The lower jaw (2) and top jaw (1) are designed to close Your Black &...
Protecting the environment Replacing worn out saw chains Replacement saw chains are available through retailers or Black & Decker service agents. Always use genuine spare parts. Separate collection. This product must not be Saw chain sharpness disposed of with normal household waste. The saw chain cutters will blunt immediately if they touch the Should you find one day that your Black &...
OUTDOOR NOISE DIRECTIVE Voltage Vdc 18 Chain speed (No-load) m/min 1.9 Maximum GKC1000 GKC1000P GKC1000NM diameter of mm 100 Black & Decker declares that these products described Weight kg 3.5 under "technical data" are in compliance with: 2006/42/EC, EN60745-1, 2000/14/EC, Chain Saw, Annex VI...
Page 17
The product has been used for trade, professional or hire purposes. The product has been subjected to misuse or neglect. The product has sustained damage through foreign objects, substances or accidents. Repairs have been attempted by persons other than ...
Page 19
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.